From icesus
Revision as of 00:12, 27 March 2020 by Cyto (talk | contribs)
Jump to navigation Jump to search


  • Line of sight, direct and indirect fire, terrain height differences. (in above screenshot the enemy is in the north, but it is not seen by selected friendly force)
  • Also other units visible on battlefields (not just the lonely @).
  • The whole battlefield is shown at once in a tabletop manner so you won't miss any action.
  • Turn based, squad and platoon level (somewhat X-com like) gameplay.
  • Tournament ladder based campaign play: skirmishes (squad level), minor victories (platoon level), major victories (company level).
  • Skirmish level matches are newbie (budget) friendly and possible without provinces. It is possible to advance from skirmishes to minor victories, from minor victories to major victories (may mean seizing provinces to yourself).
  • Supports different mainguilds and kingdoms/allegiances.
  • Your units save from battle to another, enabling tuning, improving and maybe trading of your forces outside of battle.

Campaign Plans

Campaign plans contain various scenarios and ladders for achieving different game goals through battlefields.

Province acquisition

This campaign plan will start with 8 team skirmishes, which will lead into 4 minor battles, which will lead into 2 major battles, which will lead into 1 epic battle. The winner of the epic battle is usually given a province.

A campaign plan for acquiring provinces.

The "pts" means the maximum allowed battle value of a team for the said battle.


This section will contain instructions on how to prepare and conduct battles.

Anatomy of battle

Anatomy of battle.

The anatomy of battle follows a certain procedure which is common to all battlefields. See picture "Anatomy of a Battle", which illustrates a default setting for a battle for two teams. See the red numbers in the picture. The subchapters will describe each step one at a time.

Entrance to the battlefield

Entrance is meant for battle audience - which means players who simply wish to observe battles without partaking in them.

Entrance to battlefield of Wyvern Gulch.

This room is used to follow on-going battles as most of battlefield informs will be relayed into this room during active battles. To follow an on-going battle, no specific commands are needed as the information will be relayed automatically as the battle proceeds.

Betting and negotation room

This is the room where teams may negotiate, draw some initial boundaries and ultimately set the winner's prize for the forthcoming battle.

Battlefield betting room.

What you need to do here, step by step:

1. Gather two teams: Invite at least two players to form two opposing teams and get all members of both teams here. Each team can have more than one member. Each member of the team is expected to stay throughout the duration of the battle. It is possible to have one-player teams, so two players is the minimum to fight.

2. Negotiation and betting: Once all members are here, negotiate with the other team what is going to be the bet of this battle. The winning team will always have full rights and ownership to whatever the bet was placed. You can simply drop the items, or money that you want to place into the bet, on the floor.

3. Lock bets: Once both teams are in agreement about the bet which is placed on the floor of this room, type 'bet'. This command will lock the bet for the battle. Note that you can always use 'unbet' if you decide the bet is after all not satisfactory and dismantle the deal.

Team ready rooms

Team rooms are used for finalizing negotations for battle and organizing your battle force for deployment stage, which is the first stage of any battle.

Battlefield team ready room.

What you need to do here, step by step.

1. Negotiate the remaining battle details with the other team: a. what is the minimum battle force both teams will deploy in battle (can be different between teams) b. what is the maximum battle force both teams will deploy in battle (can be different between teams)

First, look at 'settings'. The 'battle force limits' indicates which is the so called hard floor and ceiling of battle value that is possible to deploy into this battle. With these hard limits in mind, you can use commands 'forcemin' and 'forcemax' to adjust limits that you are willing to impose on your team. The opposing teams can naturally do the same, until you reach an agreement of what kind of force all teams are going to deploy.

2. Label your team. Give your team a name by using command 'label'.

3. Choose whether you want to pick starting locations your force in the battlefield manually, or do you want starting locations be picked randomly. Use command 'pickstart' to do this.

4. Choose which tactic your team is going to employ by using the 'tactic' command. You have three tactic options available:

  • attack: Your force may hold up to half of its units in reserves. You can deploy your reserves at any point later in the battle (whereas in probing you must deploy reserves after first battle turn.)
  • defend: Your force may deploy all of its units at once. You have the entire firepower of your force available from the beginning of the battle.
  • probe: Your force may deploy up to half of its units during first battle turn AND reserves will be deployed automatically after this first battle turnm, in 2nd battle turn. this means you will have one entire battle turn for probing the battlefield before your entire force can be targeted by e.g. enemy archers.

5. If everything in 'settings' can be agreed with the other teams, you can type 'ready' to raise a flag indicating your team is satisfied with the agreed battle parameters. However, command 'unready' will dismantle this agreement if it turns out there are still details under dispute and which prevent your team's readiness.

6. Depending on your tactic, place your deployment forces on the floor of the deployment room to the north. Then, place your reserve forces on the floor of the reserve room to the south. You can use command 'settings' at all times to see how much force you are about to deploy, how much you keep in reserve, and how much your team has in total.

7. Once you are done with placing your deployment and reserves, all members of your team need to return to the team's ready room. Then, type 'deploy' and your tactic, deployment and reserves plan will be inspected. If you need to correct something, you will be told what. If all is good, 'deploy' command will set your team ready and locked.

Note: All players must clear the deploy and reserve rooms and proceed to the team ready room before deployment stage of battle can begin.

8. Deployment into battle starts automatically once the last team to participate is ready and locked. Who deploys first will be determined randomly. You will be informed when it is your team's turn to deploy. When this moment comes, type 'startdeploy' to deploy your forces. At this point you and your team will be transferred to your team's podium in the battlefield, from which you will find more instructions on how to deploy your forces.


Podium is another name for the seating box by the side of the battlefield. From here you can effectively guide your troops in battle without needing to leave anywhere.

A battlefield podium.

Your team will stay in the podium for the duration of the battle. A battle ends when victory conditions are met (default: all enemy forces are killed), or the other team surrenders and there is only one active team left.

Debriefing room

Once a battle comes to an end, all teams with their surviving and wounded forces will be lead into their respective debriefing rooms. Each team will have their debriefing in their own dedicated debriefing room.

Battlefield debriefing room.

Each team will now be able to share their loot, surviving forces and in addition they will also receive the prize which was agreed to be passed to the winning team of the battle. In the end of an epic battle, this reward can also be external, e.g. a province.

Once all teams mark debriefing as done (by typing 'done' in the debriefing room), an exit will open which will allow members of both teams return back to the arena entrance.

At this point, you have witnessed the horrors of battlefield and you will bear the mental scars caused by it for the remainder of your life. Until the next inevitable battle.


Creating a mercenary company

Mercenary companies are easy way to start battlefields. Once you've learned the ropes of playing mercenaries, you might want to consider selecting your allegiance and start playing for some specific kingdom. However, for the purpose of this tutorial we will first create a mercenary company.

Note that this tutorial assumes you have not yet selected your allegiance, which the system will interpret as you will play mercenaries by default.

Hiring your people

To hire mercenaries, you need to go to the Mercenaries battlefields shop which is located in Vaerlon, 8 rooms east from the Double Dragon inn.

Hiring costs some of your experience and silver, so you will need to have a total of 100k experience and also 100k of silver on you to complete this tutorial.

In the mercenaries shop, type 'list'.

First, you need a leader. Type 'hire mercenary veteran'. My new mercenary veteran's name is Mongrel.

Then, hire two mercenary regulars by typing 'hire mercenary regular' twice. These two new regulars are named Edge, and the other is named Raine.

As your new hires will be delivered to your inventory, drop them: drop all mercenary

Now, we can build the company by using command "trooper". Type 'trooper mongrel do squad-assign to alpha', 'trooper edge do squad-assign to alpha', 'trooper raine do squad-assign to alpha'.

All three have now been assigned to a squad named 'alpha'. Type 'roster' to verify.

Your mercenary squad is now ready. You can 'get all mercenary' and continue.

Note: Outside of battle, all battlefield assets like these mercenaries are represented in form of tokens, which is not an unusual way for any wargame player to organize their rank and file. In this inactive form, they are almost weightless, saveable objects you can get and drop and manipulate normally. You can also save them over boot, so your company won't be lost even if you're not in battle. The only way you can lose them is in battle.

Finding an opponent

Battlefields is designed for minimum of two players. So to try out your mercenary force in battle, ask another player to join your battle and ask him to do the steps you just did above. Once you and your friend have a mercenary company ready and with their squads assigned, you are ready for battle.

Go to battlefield of Wyvern Gulch

By using command 'roster' you will find out that the total battle value of your mercenary force is a total of 85 points.

There are a total of five battlefields in Silverspire.

Each of them has a specific lower and higher battle value limits specified and battle value of your company and your friend's company must be within these limits.

The Wyvern Gulch, located right in the center of Silverspire, has a minimum battle value of 50 and maximum of 250. So it will do perfectly fine for testing of our mercenary power.

So go to the entrance of Wyvern Gulch with your friend with each carrying your company in your inventory. See picture below, this is the correct place.

At the entrance of Wyvern Gulch.

Place your bets

From the battlefield entrance, both players go 1 north.

Negotiation and betting stage of battle.

Type 'drop 1 mithril' (have 1 with you!) This will be our battle bet. Regardless of the bet, if there are sufficient victories in the battle, there will also be additional automated rewards.

Type 'bet'

Now, the other player goes 1 west, to team #1 ready room. The other player goes 1 east, to team #2 ready room.

Readying your team

Once in the ready room, both players type: 'forcemin 50'

After that type: 'ready'.

Now, both players go 1 north and drop all your mercenaries on the floor of this room. So I will drop my mercenaries in the floor of deployment room of team #1 while Doromo will drop his mercenaries on the floor of deployment room of team #2.

Both players go 1 south, back to team ready room.

Now, both players type 'deploy' to lock both teams.

Deploying your team to the battlefield

Deployment stage begins.

This indicates that the deployment stage has begun. The battlefield daemon determines the order of initiative. This order will last until the end of battle. Now, order of deployment was decided so that team1 will always go first, then team2. So also deployment to battle will follow this order.

So, whichever team in your setup is chosen to go first, that team member should now type 'startdeploy' to start his deployment of squad. The team that won the initiative will deploy first, and in the meanwhile the other team has to wait until they are ready. Once the first team is deployed, a signal is given for the second team to start deployment by typing 'startdeploy' on their team's behalf.

Once 'startdeploy' is typed, the team player will be moved to the podium and he can guide the deployment stage of his force from there.

Battlefield deployment

It is assumed by default that players will want to select their deployment positions in the battlefield manually.

However, in the team ready room, you can use command 'pickstart' to toggle automatic deployment of force. Automatic deployment means computer will deploy your force randomly in your team's deployment area. In this tutorial, we will not change the default setting so that we learn to deploy our forces manually.

In the podium, the most important commands at your disposal are:

  • company - this will show the status of your whole company, both those deployed and those still in reserves
  • next - select next trooper of your company
  • prev - select previous trooper of your company

To see where you are, you first have to select a trooper, type 'next', then type 'tac' which is a shorthand for 'tactical'.

Tactical view of the battlefield.

Also, once you have selected a trooper, you can use command 'squad' to see status of squad this trooper belongs to. Remember, we assigned them to squad 'alpha' earlier, so they all are in that squad now.

You can try 'next' and 'prev' commands, followed by 'tac' to see how things work. In the tactical, your currently selected trooper is marked as white @, while other troopers of your company are marked as white *.

Now that we are in the deployment stage of battle, you can use this opportunity to position your company the way you want at no movement cost. This comes with the restriction: Each team has their designated deployment area, and no trooper can go past these boundaries during the deployment stage.

To deploy your force, choose your troopers one at a time using 'next' and 'prev'. Once you have selected a trooper, use command 'deploy <direction>' to move him. You can try e.g. 'deploy s', 'deploy w', etc.

Battle deployment in progress.

NOTE: Because your selected trooper is a leader (as it is a mercenary boon: all mercenaries can lead a squad), the rest of the same squad will follow. If you wish to make a trooper stay, use 'next' to select that trooper and type 'stay' so he will not follow squad leader anymore. Type 'follow' to make that trooper follow the leader again.

Once you have deployed all your troopers, type 'enddeploy'. Now, the other team may follow suit and type 'startdeploy' and go through the same stage. Note however that they will be in the opposite end of the battlefield and because there is no line of sight, the activity of other will be hidden from the other. Once the opposing team is ready with deployment, again, 'enddeploy'. Once the last team to deploy ends the deployment stage, the first battle turn will start automatically.

[Battle] Your team's deployment is now done.
[Battle] Team team1 (#1) finishes deployment.
[Battle] 1 teams out of 2 are now deployed.
[Battle] team2 (#2) turn begins.
icesus64 >Team team2 (#2) begins deployment.
[Battle] Team team2 (#2) finishes deployment.
[Battle] All 2 teams have now been deployed. Battle begins.
[Battle] Battle turn 0 over.
[Battle] Team team1 (#1) force: 85.
[Battle] Team team2 (#2) force: 85.
[Battle] Battle turn 1 begins.
[Battle] team1 (#1) turn begins.

First battle turn

Type 'next' to select a trooper.

Type 'action' to select an action. Remember, each of your troopers may perform two actions on your team's turn. In-game helps will describe each available action. Type 'battlefields actions' to read about them.

I will choose 'action move'. Note that because in mercenary squad everyone can be a squad leader, all members of the squad will follow and choose the same action.

Use this command to choose action for Raine.
Usage: action <move|shoot|charge|ready>
action move
Mongrel [lp4] has selected action Moving (4/4).
Edge [zw1] has selected action Moving (4/4).
Raine [bbn] has selected action Moving (4/4).

I will move my mercenaries 1 se, 1 s.

move se
Mongrel [lp4] moves to southeast (3/4).
Edge [zw1] moves to southeast (3/4).
Raine [bbn] moves to southeast (3/4).
icesus64 >
move s
Mongrel [lp4] moves to south (2/4).
Edge [zw1] moves to south (2/4).
Raine [bbn] moves to south (2/4).

Then, end the action.

Mongrel [lp4] ends current action.
Edge [zw1] ends current action.
Raine [bbn] ends current action.

I have still second action left. I will move more towards south.

move s
Mongrel [lp4] moves to south (3/4).
Edge [zw1] moves to south (3/4).
Raine [bbn] moves to south (3/4).
move s
Mongrel [lp4] moves to south (2/4).
Edge [zw1] moves to south (2/4).
Raine [bbn] moves to south (2/4).
icesus64 >
move s
Mongrel [lp4] moves to south (1/4).
Edge [zw1] moves to south (1/4).
Raine [bbn] moves to south (1/4).
icesus64 >
move s
Mongrel [lp4] moves to south (0/4).
Edge [zw1] moves to south (0/4).
Raine [bbn] moves to south (0/4).
icesus64 >
Mongrel [lp4] ends current action.
Edge [zw1] ends current action.
Raine [bbn] ends current action.

NOTE! If you use 'next' or 'prev' in midst of your action, your action with your currently selected trooper will end. Note that if you end an action, your enemy can react. Read on-line help 'battlefields reactions'.

While we're at it, we're going to choose 'shoot' as our squad's default reaction.

reaction shoot
Mongrel [lp4] alert reaction is now shoot.
Edge [zw1] alert reaction is now shoot.
Raine [bbn] alert reaction is now shoot.
icesus64 >
 ID         Re Name           |Type        Rank   X   Y   Z   R   B    Lock
 [lp4]L2    Sh Mongrel        |mercenary   Cpl    23  14  0   0   270          
 [zw1]L2    Sh Edge           |mercenary   Tpr    23  14  0   0   270          
*[bbn]L2    Sh Raine          |mercenary   Tpr    23  14  0   0   270          
Legend: Bearing (B)

The "Re" column in squad contains the shorthand for which reaction is chosen. 'Sh' is for shoot.

Since my team has only one squad, and all of them have done their two actions following per their leader, my team turn is over. Type 'endturn' to end your turn. Your opponent will be notified of this and his turn will start automatically.

Miscellaneous tips (unofficial)

  • If you use commands 'next', 'prev', 'nextlead' or 'prevlead', it means 'you are letting go of your current token.' Therefore, any unfinished actions with your current token will be ended.
  • Do not travel in tight packs near the enemy. Break into formations because indirect long bow arrow volleys are brutal reality and WILL be employed by any commander worth his paycheck. It is a good practice to have a point leading the rest of the team. Do not make your unit leader be this point. Take a tip from Antti Rokka: